De'Longhi Magnifica, Dinamica and PrimaDonna error codes
De'Longhi shows words, not codes, on most machines. Newer models also log a numeric code (1101, 1454, 2257 and so on) which service uses; both are listed.
Fix steps are the same across ECAM (Magnifica S, Dinamica, PrimaDonna) and ESAM (older Magnifica) machines unless a page says otherwise.
All codes
| Code | Meaning | Fault | DIY |
|---|---|---|---|
General Alarm (code 1101 / 1512) | Catch-all alarm: the board detected a fault it cannot isolate, most often the infuser (brew unit) or its sensor | general alarm | easy |
Insert Infuser Assembly | Infuser not detected in its seat | infuser not seated | easy |
Insert Grounds Container / Empty Grounds Container | Grounds container not detected, or the empty message will not clear | grounds container not detected | easy |
Water Circuit Empty / Fill Circuit | The machine cannot detect water in the circuit; air is trapped or the pump is not priming | air in water circuit | easy |
Ground Too Fine, Adjust Mill | Brew pressure too high: the grind is too fine, or the circuit is blocked | brew pressure too high | easy |
Insert Water Spout | Machine does not detect the hot-water / milk spout when it needs to run a rinse or relieve pressure | spout not detected | easy |
Grinder stuck (code 1454) | Grinder motor stalled | grinder jammed | easy |
Leak alarm (code 3963) | Water detected in the base of the machine | internal leak | moderate |
Descale light stays on after descaling | Descale cycle not registered as complete | descale will not clear | easy |