Miele CM / CVA F10 / F17: water not drawn in
F10 / F17 means: No water, or very little water, is being drawn in — the Miele manual wording for a water-supply fault.
How to fix F10 / F17
- Remove the water container, fill it with fresh tap water (cold, not distilled) and reinsert it until it locks — the manual fix, verbatim.
- Check the container valve seat for a stuck or dirty seal and rinse it under running water.
- Plumbed-in machines: confirm the shut-off valve is open and the inline filter is not clogged.
- Descaling the water intake is the next step if the fault recurs — scale in the valve makes it intermittent.
- A machine that still reports F10/F17 with a verified supply needs the intake valve or pump looked at by Miele service.
When to stop and call a repairer
Nothing dangerous — just do not run the machine dry repeatedly.
What it costs
Parts: Usually $0; intake valve $30 to $60 if it has failed.
Service: Out-of-warranty manufacturer service for a super-automatic is typically $250 to $500 including return shipping; independent espresso repairers are usually cheaper for a single part.
Worth repairing? Yes — start with the container; it is the answer nearly every time.
FAQ
What does F10 / F17 mean on the Miele CM / CVA?
No water, or very little water, is being drawn in — the Miele manual wording for a water-supply fault. F10 and F17 share one manual entry: the machine tried to fill and failed or trickled. On countertop CM machines the cause is almost always the removable container — empty, mis-seated, or its valve sticking — and on plumbed CVA builds it moves upstream to the supply valve and filter. This is the friendliest fault in the Miele table: the manual fix is genuinely the whole fix.
Can I fix F10 / F17 myself?
DIY difficulty: easy. Remove the water container, fill it with fresh tap water (cold, not distilled) and reinsert it until it locks — the manual fix, verbatim. Check the container valve seat for a stuck or dirty seal and rinse it under running water.
How much does it cost to fix F10 / F17?
Usually $0; intake valve $30 to $60 if it has failed. Out-of-warranty manufacturer service for a super-automatic is typically $250 to $500 including return shipping; independent espresso repairers are usually cheaper for a single part.
Is it worth repairing?
Yes — start with the container; it is the answer nearly every time.
F10 / F17 during startup or during use?
Miele CM / CVAs report F10 / F17 any. That timing is a useful clue when narrowing the cause.
Can I keep using the machine with F10 / F17 showing?
Usually you can finish the drink you are making, but do not ignore it — the underlying fault rarely heals itself. Work through the cheap checks first.
Will F10 / F17 clear on its own?
Often, yes. The first step (remove the water container, fill it with fresh tap water (cold, not distilled) and reinsert it until it locks — the manual fix, verbatim) clears a share of cases on its own. If the code comes straight back, the part is genuinely at fault.
How long does the repair take?
Fifteen to thirty minutes with basic tools, once you have the part.
Code meanings are compiled from manufacturer service references and repair documentation for the CM / CVA; fixes follow documented repairs and owner reports. Model revisions can differ. If your appliance is under warranty, contact the manufacturer before opening it.