Samsung range and wall oven E-08: oven not heating
E-08 means: Oven not heating: bake/broil element or temperature sensor fault (on some models: door lock fault).
How to fix E-08
- Cut power for 3 minutes and restore.
- Look at the bake element with the oven on: it should glow evenly. A visible break or blister means replace it.
- Meter the oven sensor: about 1080 ohms at room temperature.
- If element and sensor are fine, the relay board is not switching the element.
When to stop and call a repairer
Cut power before touching element terminals.
What it costs
Parts: Bake element $30 to $60; sensor $20 to $40; relay board $100 to $200.
Service: A home visit from an appliance technician runs $120 to $250 for diagnosis plus the part. Boards are the expensive part; sensors and switches are cheap.
Worth repairing? Element or sensor: yes.
How to check the error log
Samsung ovens do not have a user-accessible error log. The code stays on the display until you fix the cause or cut power at the breaker for 3 minutes; if it returns after a reset, treat it as real.
Clear the log after a repair so you can tell whether the fault has really gone.
FAQ
What does E-08 mean on the Samsung range and wall oven?
Oven not heating: bake/broil element or temperature sensor fault (on some models: door lock fault). The board set a temperature and the oven did not climb. The bake element has burnt out (look for a blister or break on it), the temperature sensor is off, or a relay on the board did not close. Some Samsung support pages list E-08 as the door-lock motor; check your model manual.
Can I fix E-08 myself?
DIY difficulty: moderate. Cut power for 3 minutes and restore. Look at the bake element with the oven on: it should glow evenly. A visible break or blister means replace it.
How much does it cost to fix E-08?
Bake element $30 to $60; sensor $20 to $40; relay board $100 to $200. A home visit from an appliance technician runs $120 to $250 for diagnosis plus the part. Boards are the expensive part; sensors and switches are cheap.
Is it worth repairing?
Element or sensor: yes.
Code meanings are compiled from manufacturer service references and repair documentation for the NE / NX / NV / NZ; fixes follow documented repairs and owner reports. Model revisions can differ. If your appliance is under warranty, contact the manufacturer before opening it.