GE Appliances dishwasher FTD: failed to drain
FTD means: Failed to drain.
How to fix FTD
- Clean the filter and sump.
- Clear the drain hose and check the disposal knockout.
- Reset at the breaker and run a drain.
- Replace the drain pump if it is silent or hums.
When to stop and call a repairer
Disconnect power before working in the sump.
What it costs
Parts: Drain pump $40 to $80.
Service: A home visit from an appliance technician runs $120 to $250 for diagnosis plus the part. Boards are the expensive part; sensors and switches are cheap.
Worth repairing? Yes.
How to check the error log
On most GE dishwashers, hold Start for 5 seconds with the door open to enter the service menu; on models with a hidden display, press Select Cycle and Start together for 5 seconds. The last error shows on the display. Turn power off at the breaker for 60 seconds to reset the board.
Clear the log after a repair so you can tell whether the fault has really gone.
FAQ
What does FTD mean on the GE Appliances dishwasher?
Failed to drain. Same as C1 to C3 on newer models: the pump ran and the water stayed.
Can I fix FTD myself?
DIY difficulty: easy. Clean the filter and sump. Clear the drain hose and check the disposal knockout.
How much does it cost to fix FTD?
Drain pump $40 to $80. A home visit from an appliance technician runs $120 to $250 for diagnosis plus the part. Boards are the expensive part; sensors and switches are cheap.
Is it worth repairing?
Yes.
Code meanings are compiled from manufacturer service references and repair documentation for the GDT / GDF / GDP / Profile / Cafe; fixes follow documented repairs and owner reports. Model revisions can differ. If your appliance is under warranty, contact the manufacturer before opening it.