The Breville / Sage Barista Touch Impress shows this code with identical meaning and fix as the Barista Touch. Full guide for ER18.
Applies to: Barista Touch Impress.
How to fix ER18
- Unplug. Do not keep resetting the breaker; each trip means current is going where it should not.
- Let the machine dry for 24 hours somewhere warm if it has been leaking.
- Check the mains cable and plug for damage and try a different socket on a different circuit.
- If it trips again, or if you cannot find the cause, contact Breville or an authorised service centre. Finding a leak behind panels or testing the element and power board is technician work.
When to stop and call a repairer
This is a mains-electricity fault. Do not open the machine or test live circuits; hand it to a repairer.
What it costs
| Parts | Not published by Breville. Ask an authorised service centre for a quote. |
|---|---|
| Service | Not published by Breville. Ask an authorised service centre for a quote. |
| Worth repairing? | Drying out may be enough. For an element or board on an old machine, get a quote first. |
How to check the error log
Unplug the machine. Press and hold the Power button while plugging it back in. When the password screen appears, enter 02015 to open Service Mode, then open the error log.
Clear the log after a repair so you can tell whether the fault has really gone.
Beyond the fix
Tips and tricks
- Do not open the machine yourself. The manual says to leave anything beyond cleaning to Breville support or an authorized servicer, because these parts sit next to mains wiring.manufacturer manual
Common mistakes
- Retrying power cycles repeatedly on a protection-type code instead of noting it and getting it checked.
Further reading
Questions
What does ER18 mean on the Breville / Sage Barista Touch Impress?
E-fast protection triggered due to a detected electrical or safety fault. The machine detected an electrical fault: leakage current to ground, an unexpected mains waveform, or a heater drawing power when it should not, according to third-party service tables (Breville publishes no code table). Water on a heating element or the power board is a plausible cause. This is the kind of fault that can also trip the GFCI / RCD in your kitchen.
Can I fix ER18 myself?
DIY difficulty: not recommended. Unplug. Do not keep resetting the breaker; each trip means current is going where it should not. Let the machine dry for 24 hours somewhere warm if it has been leaking.
How much does it cost to fix ER18?
Not published by Breville. Ask an authorised service centre for a quote. Not published by Breville. Ask an authorised service centre for a quote.
Is it worth repairing?
Drying out may be enough. For an element or board on an old machine, get a quote first.
When does ER18 typically show up?
Breville / Sage Barista Touch Impresss report ER18 any time. There is no reliable pattern to when it appears — treat any occurrence as real.
Can I keep using the machine with ER18 showing?
Treat it as a stop-using signal: ER18 marks a fault that can damage the machine (or worse) if you keep running it. Do the safe first steps below, then stop.