Applies to: dishwasher.
How to fix PF
- Press Start to resume or cancel.
- If it happens with no outage, check the breaker and the plug under the sink.
When to stop and call a repairer
Nothing dangerous here.
What it costs
| Parts | Nothing. |
|---|---|
| Service | Service prices vary by region and are not published by the manufacturer. Ask an authorised service agent for a quote before booking a visit. |
| Worth repairing? | Yes. |
How to check the error log
GE does not publish a consumer diagnostic-mode sequence for its dishwashers. Service-mode entry differs by model and lives in the technical service manual for your model number (printed on the tub or door edge). Button sequences circulating online are model-specific and often wrong, and service mode can run pumps, valves and heaters, so we do not list them. GE's own reset is: Start/Reset, wait two minutes, then switch off at the breaker for about 30 seconds.
Clear the log after a repair so you can tell whether the fault has really gone.
Beyond the fix
Tips and tricks
- Reselect the cycle and press Start. GE says nothing else is needed.manufacturer manual
- If the dishwasher then fills twice, look at the C4 float and sump checks.manufacturer manual
- Beeping every 30 or 60 seconds usually means the door was unlatched mid-cycle. Close it and the cycle resumes.manufacturer manual
Common mistakes
- Taking PF as a failed part when it simply reports a power interruption.
- Unplugging repeatedly mid-cycle.
Easily confused with
- C4 is the related code when the tub filled twice after a power failure.
Further reading
Questions
What does PF mean on the GE Appliances dishwasher?
Power failure during a cycle. Power was interrupted mid-cycle. Nothing is broken.
Can I fix PF myself?
DIY difficulty: easy. Press Start to resume or cancel. If it happens with no outage, check the breaker and the plug under the sink.
How much does it cost to fix PF?
Nothing. Service prices vary by region and are not published by the manufacturer. Ask an authorised service agent for a quote before booking a visit.
Is it worth repairing?
Yes.
PF during startup or during use?
GE Appliances dishwashers report PF any. That timing is a useful clue when narrowing the cause.
Can I keep using the machine with PF showing?
Generally yes — PF is more of an annoyance than an emergency. Fix it when convenient; just do not let the cause sit for months.
Will PF clear on its own?
Often, yes. The first step (press start to resume or cancel) clears a share of cases on its own. If the code comes straight back, the part is genuinely at fault.
How long does the repair take?
Fifteen to thirty minutes with basic tools, once you have the part.